Emergency Lighting Inspection Checklist
Free download · A4 (210 × 297mm)
Inspect emergency lighting systems with this A4 checklist covering 11 sections per BS 5266 and IEC 60598. Includes luminaire physical condition, charging indicator check, monthly function test (simulated mains failure), exit sign visibility and legibility, annual 3-hour battery duration test, lux level measurement at floor level, escape route coverage verification, open area coverage (0.5 lux minimum), high-risk task area coverage (10% maintained illuminance), central battery system status, and test log update.
What's Included
How to Print
- ●Print on standard A4 paper (80gsm is fine)
- ●Black & white printing works perfectly
- ●Photocopy and distribute to entire site teams
- ●Fill in project details before photocopying
- ●File completed checklists for audit trail
Try the Interactive Calculator
Need precise calculations beyond quick reference? Try our free online calculator with full clause references and professional report output.
Open CalculatorRelated Downloads
Lighting Schedule
Free lighting and small power schedule template Excel. Document luminaire types, socket outlets, circuit loads, and phase assignment per IEC 60364 and NEC. No signup required.
IR Test Record
Download a free insulation resistance test record template Excel per IEC 60364-6 and BS 7671. Columns for circuit data, test voltage, L-N, L-E, N-E readings, temperature, humidity, and pass/fail. No signup required.
Cable Installation IEC
Download a free cable installation inspection checklist per IEC 60364-5-52 and BS 7671. Covers route verification, bend radius, fire barriers, terminations, labelling, and pre-test. No signup required.
Frequently Asked Questions
What is an emergency lighting inspection checklist?
An emergency lighting inspection checklist ensures all emergency luminaires, exit signs, and central battery systems function correctly during power failure. It follows BS 5266 (emergency lighting) and IEC 60598 (luminaire safety) to verify illumination levels on escape routes meet minimum requirements.
What should emergency lighting inspections include?
Key checks include luminaire physical condition, charging indicator status, monthly function test (simulated mains failure), exit sign visibility, annual 3-hour battery duration test, lux level measurements (1 lux escape routes, 0.5 lux open areas), and central battery system status verification.
How often should emergency lighting be tested?
BS 5266-1 requires: daily visual check of indicators, monthly short-duration function test (simulating mains failure for sufficient time to verify lamp operation), and annual full-duration test (3 hours for escape routes). All test results must be logged in a test record book kept on the premises.